|
We invented the
Split
sleeve marker, specializing in
non-repetitive marker. We prepare markers directly from circuit
plans, file drawing or your hand written list, with capabilities of
meeting diameters from .045 to 6.0. Markers are designed in
accordance with customer requirement using laser quality printing
and programs developed in house to meet the need of any tagging
criteria. Also available, a phone line access to our computer, with
the ability to receive files directly to our computer disks.
Split sleeves are made of
vinylite plastic with a clear laminated overlay to protect the
printed matter. They offer high resistance to abrasion, water, oil
gasoline, alcohol and most acids, and are vermin and fungus proof.
Permatag split sleeves
may be applied to the wires or cables either before or after lugs
have been fastened or connections made.
Custom made for your
wire, and with any required nomenclature, they snap on and grip
tightly. They will not ride loosely.
It is recommended that
when a split sleeves are to be subjected to sever abrasion or
temperatures above 65°C they be welded into a solid sleeve by
moistening the seam of the marker with type IB permatag sealer. This
welding of the split in the sleeve permits their use in temperature
areas up to 105°C. (Permatag split sleeve type IB sealer is available
in half pints and quart containers.)
|
